Toll free 800-227-7642 • Ph. 215-943-2930 • Fax 215-943-2931 • E-mail sales@sgfrantz.com

Series F1 with Wet-Type Grids continued
SPECIFICATIONS:
FerroFilter® series F1 electromagnetic separators with Wet-Type grids fordry processing

Model 68WVF-HP, suspended, Water-cooled

 

 

 

 

 

 

 

 

 

 

 

 

 

Model 68WVF, with floor stand		 Suspended Models 68WVF1 68WVF-HP1
inches
centimeters
Height of
separator		  (A) 15.06
38.3
Height, base of motor to base of separator
  (B) 1.25
3.2
Width,
maximum 		 (C) 26.75
68.0 		36.00
91.4
Outside diameter inlet and outlet  (D)

9.25
23.5

Suspension rods,
    Spacing  
  (E)
11.88 x 13.00
30.2 x 33.0
Length2     (F)
0 - 7.5
0 - 19.0
Feed Hopper
Diameter     		 (G) 15.50
39.4
Capacity 3 cubic feet/hour
cubic meters/hour
12-100
0.3-2.8
Coil current at 115
Volts DC
amperes
2.5
5.0

Vibrator motor,
220/440 Volts AC,
50/60 Hertz,
3 phase

 horsepower
1/2 - 3/4
Weight pounds
kilograms
Net 402
182 		402
182
Shipping
452
205
452
205
Floor Models 68WVF1 268WVF1
inches
centimeters
Floor stand (pedestal) 26.25 x 37.00
66.7 x 94.0
Total height       (H) 38.75 98.4 45.00
114.3
Floor to outlet     (K) 23.80
60.5
Height of
separator     		 (L) 15.06
38.3
Weight pounds
kilograms
Net 497
225 		497
225
Shipping 557
253 		557
253

1. Standard models are air-cooled. High power (HP) units are water-cooled. Explosion-proof (XP) versions of each of the listed models conforming to the specifications shown above are available. These units are designated by model number and suffix, as 68V-HP, 68V-HP-XP, etc. Explosion proof models are manufactured to comply with requirements for equipment for use in CLASS I, DIVISION 1, GROUP D hazardous locations and CLASS II, DIVISION 1, GROUPS E, F, & G, dust ignition-proof indoor locations. Explosion proof models are not certified by any independent testing laboratory.

2. Customers may choose length of rod from top of separator within ranges shown.

3. Processing capacity varies with material characteristics such as particle size and shape, specific gravity, moisture content, etc.

 

Go back to begining of Series FI with Wet-Type Grids

 Back to top

Go back to Table of Contents for Electromagnetic Separators
Or Click to go to Series F2